Aurora Talon Jeep Wrangler JK Off Road LED Fog Light Kit - 2,880 Lumens

Tear into the night with Aurora's Talon LED fog Light kit for Jeep Wrangler JK's. The Aurora Talon's are easy to install LED fog lights that feature 5 watt Cree LED chips that produce a crisp white light rated at 2,880 lumens. Aurora's Plug n Play design ditches the complications of heavy wiring in favor of plugging directly into your factory fog light connectors. The round design compliments the traditional look of your vehicle without compromising style. 

This kit is perfect for the enthusiast looking to upgrade their fog lights but doesn't want to switch to the square cubed lights and comprise the look of your vehicle. Order yours today and take advantage of our free shipping option.

Aurora Talon LED Fog Light Features: 

• IP68 Waterproof housing
• Guaranteed to last for 50,000 hours
• Equipped with over-sized heat sink to prevent over heating
• Built with USA made, Cree LED's
• Engineered to not  Flicker
• Lens comprised of Hard-coated Poly carbonate
• Housing is comprised of heavy duty Die-Cast aluminum
• Aurora Engineered PCBA means no electronic interference 
• Crisp white color temperature of 6000k
• SAE Complaint
• DOT Complaint 
• Fog Lights produce a combined 2,880 Lumens
• Low Voltage Protection, No Anti Flicker
• Fits other Makes & Models, Check for your application below

Order before 4 PM EST and the product will ship out of Allentown, PA on the same day. 

TALON LED FOG LIGHT EXTERIOR

• Outdoor Dupont painting coats the LED fog light housing, guaranteeing the housing will remain unchanged for 5 years.
• The lens is crafted from high quality GE Lexan which is 300 times stronger than glass plus its resistant to corrosive acids and other chemicals such as gasoline. The lens is also manufactured to be scratch resistant and UV resistant. 

TALON LED FOG LIGHT INTERIOR

• Aurora LED fog lights are made with Cree LED chips (Made in the USA) which allows for low forward voltage, low heat generation, long life and high ESD tolerance and resistance.
• The PCBA (Printed Circuit Board Assembly) is engineered with unique temperature protection, voltage protection and current protection designs to maximize efficiency and increase durability. This unique design means no electromagnetic interference with other nearby electronics on your vehicle.
• Over voltage protection is installed prevent premature failure from accidental voltage fluctuations.

TALON LED FOG LIGHT TESTING

Vehicle Applications

The Aurora Talon LED fog light kit fits a wide range of vehicles that allow for a 4 inch fog light to be mounted but it specifically fits the following vehicles: 

• 2007-2017 Jeep Wrangler
• 2011-2013 Jeep Grand Cherokee
• 2014-2018 Jeep Cherokee
• 2009-2017 Dodge Journey
• 2005-2007 Dodge Magnum
• 2011-2014 Dodge Charger
• 2006-2010 Chrysler PT Cruiser
• 2005 Chrysler 300

TALON LED FOG LIGHT TECHNICAL SPECIFICATIONS

• Size: 4 Inch
• Dimensions: 4" x 3.4" X 4"
• Light Type: Fog Light
• Operating temperature: -40 to 145 degrees
• Wattage: 30 Watts
• Operating Voltage: 9-36V DC
• Amp Draw: 1.4 AMps
• Color Temperature: 6000K
• Lumens: 1440 Lumens each Fog Light
• IP Rating: IP68
• Life Span: 50,000 hours
• Housing color: Black
• Interchange Part's: Chrysler 05182026AA, 05182026-AA, CH2590109, 4805856AA, 4805856-AA, 4805856AB, 4805856-AB, JW Speaker 6145 J2 Series 0554573, Oracle 5775-333, KC 497, Oracale 5775-504, Oracale 5775-001, KC Hilites 1497, Spyder 5015372, Dorman 923-837, KC Hilites 494, KC Hilites 493, KC Hilites 498, Baja Designs 587503, Vision X 9892474, Vision X 9891828, Vision X 9891811, Recon 264506BK, Mopar 82215163, Mopar 82215549, Pro Comp 76504P, Xprite FL-R4IN-60W-4VARIATION, Morimoto J132515,

Jeep Wrangler LED Fog Light Installation Instructions:

1. Remove the front grill and top bumper cover
2. Remove the four screws in each of the four corners of the fog light.
3. Remove the fog light and disconnect the foig light connector.
4. Mount new fog light with the four screws
5. If the new fog lights are equipped with a Halo ring then splice the halo wire into one of your parking lights.
6. Once installed test to make sure all lighting features worked as before.