The Kawasaki Teryx KRX is a UTV that is built from the ground up to be the top dog in the world of sport SXS. These terrain taming machines boast a powerful high torque twin engine with a long travel suspension to match, letting the driver dominate the harshest off road trails. So while your buddy in his RZR is eating your dust you are blazing ahead until the sun goes down which is when you hit the switch to get your factory LED headlights on. That is when you realize you should invest in a good set of off road lights for your KRX.
Best Kawasaki KRX Light Bar
Based off the customers needs they went with the Aurora NSSR 40 Inch LED light bar which utilizes a combination beam pattern that produces 24,320 lumens. The patented, IP69 rated one piece design housing is constructed of high quality 6063 aluminum and then mated with an UV & Scratch resistant GE Lexan lens.
Features of the Kawasaki KRX light bar
- GE Lexan Lens - This Scratch and UV resistant lens is 300 times stronger than glass
- Deutsch Waterproof connector
- Outdoor Dupont painting coats the LED light bar housing, guaranteeing the housing will remain unchanged for 5 years.
- Military Breather - Allows this light bar to rapidly adjust to its surroundings to prevent unwanted moisture build up.
- Ultra-Bright 24,320 Lumens
- Beam Distance of 3,993 feet
- Osram 5-watt LED Chips
- Beam Type: Combination Beam (Spot & Flood)
- Low Amp Draw of 9.8 Amps
Kawasaki KRX light bar Dimensions
What comes with the Kawasaki KRX Off Road light bar
Included in this kit will be everything you need to install this light bar to your Kawasaki KRX. This includes stainless steel mounting hardware and anti-theft bolts to protect your investment.
Also included is a full wiring harness that consist of an inline waterproof fuse, 12V relay, waterproof deutsch connectors and all the wiring you need for a professional installation.
Kawasaki KRX light bar wiring harness
Wiring the new Aurora off road light bar to the Kawasaki KRX is simple because all of our products include the appropriate wiring harness.
This wiring harness consist of an
- Inline waterproof fuse
- 12V relay
- Waterproof deutsch connectors
- Waterproof Switch
Kawasaki KRX 40 Inch Light Bar installed
Kawasaki KRX 10 Inch Light Bar
Now that the forward facing lighting was addressed on this Kawasaki it was time to move onto the rear facing lighting. This lighting is used for both reversing down dark trails and for adding additional lighting to the rear of the SXS. So for the rear, we went with a pair of Aurora 10 Inch NSSR series light bars.
The Aurora NSSR 10 Inch light bar has a combination beam pattern that produces 6,080 lumens. A combination beam pattern contains both spot and flood optics which produces a beam that goes both far and wide. To ensure an impenetrable seal the NSSR series is manufactured with a patented one piece design which makes it durable enough for the most extreme off-road conditions.
Features of the Kawasaki KRX light bar
- Super-Bright 6,080 Lumens
- Military Breather - Allows this light bar to rapidly adjust to its surroundings to prevent unwanted moisture build up.
- Beam Distance over 1000 feet
- Deutsch Waterproof connector
- Low Amp Draw of 2.4 Amps
- Beam Type: Combination Beam (Spot & Flood)
- Outdoor Dupont painting coats the LED light bar housing, guaranteeing the housing will remain unchanged for 5 years.
- Osram5-watt LED Chips
- GE Lexan Lens - This Scratch and UV resistant lens is 300 times stronger than glass
Kawasaki KRX light bar Dimensions
What comes with the Kawasaki KRX off road light bar
Same as the 40 inch above.... Included in this kit will be everything you need to install this light bar to your SXS. This includes stainless steel mounting hardware and anti-theft bolts to protect your investment.
Also included is a full wiring harness that consist of an inline waterproof fuse, 12V relay, waterproof deutsch connectors and all the wiring you need for a professional installation.
Kawasaki KRX light bar wiring harness
Same as the 40 inch above.... Wiring the new Aurora off road light bar to the Side by side is simple because all of our products include the appropriate wiring harness.
Wiring the Kawasaki Side by Side Light Bars
Because all of our off road LED light bars come with its own wiring harness, installing this light bar can be done in a matter of hours.
- Simply connect one end of the harness to your battery to obtain power and ground
- Route the Aurora light bar wires in a manner that will keep it from getting snagged.
- Mount the provided waterproof light bar switch that makes it easy to switch it on and off.
- Plug in the light bar and hit the switch
- Before hitting the trails, now would be a good time to properly aim the light bar.
Kawasaki KRX Rear Light Bar Installed
Why by this light bar set-up for your Kawasaki KRX
There are two main reasons for purchasing the 40-inch NSSR light bar for the front of your Kawasaki SXS.
Reason 1: Which is appearance. Most light bars feature exterior stainless-steel screws that go around the face of the light bar which means they have the tendency to make the light bar "Pop" and stand out. The NSSR features a "Screw-less" design which means there is no stainless screws surrounding the face of the light bar. This design allows the light bar to blend seamlessly with the overall look of your Kawasaki KRX.
Reason 2: Is going to be for functionality. Space is limited and you may only have one spot to mount a light bar, so the Aurora 40-inch NSSR is the way to go. It provides you with a large number of lumens in a combination beam pattern which means the light will spread evenly in front of you. If you went with a flood light it would be wide enough, but the beam would not go far enough. And if you went with a spot beam pattern, you would be happy with the distance of the beam, but the beam would not be wide enough to cover the sides of the trail. So again, the combination beam pattern comes out on top.
Get this Kawasaki Teryx KRX 40 inch light bar today!
Get the Kawasaki Teryx KRX 10 inch light bars today!
Still have questions about which is the best Off road lights for your Kawasaki Teryx KRX?
Feel free to reach out to us by any of the methods listed below:
Phone: 484-513-7746
Email: support@offbrandproducts.com
Online Chat: Click the Chat button to be connected with a representative.